Description
1313mm / 12.3in wheelbase perfectly matches the original RC car parts. 2Fun to assemble， RC model car door can open and simulate interior detail. 3Has excellent crash resistance， and fender can be removed for easy use. 4Making your RC car look more authentic， easy to install and disassemble. 5Can be updated and modified at will， make your RC car more attractive. 6ABS plastic is durable， practical ecofriendly and exquisite workmanship.Condition: 100% Brand NewItem Type: RC Car ShellMaterial: ABS Plastic Wheelbase: Approx. 313mm / 12.3inTotal Length: Approx. 500mm / 19.7inFront Width: Approx. 200mm / 7.9inRear Width: Approx.205mm / 8.1inFitment: Fit for 1/10 RC Car Fit for SCX10Fit for SCX10 II 90046 90047Assembly Instructions:1. Use B2 screws and M3 nuts on both sides and side doors to tighten them from inside.2. Tighten from inside with 11pcs 01 screws.3. One B1 screw and two C1 screws are used on both sides of the car， and 2pcs 01 screws are used on the roof of the car.4. Use 8pcs A1 screws to tighten the front guardrail on both sides of the wheel;The last one on both sides of the wheel front guardrail is fastened with an A2 screw;The rear guardrail on both sides of the wheel is fastened with 9pcs A1 screws.5. The front guardrail is secured from the rear with 4pcs C2 screws.Install it to the front and fasten the inside with 2pcs D1 screws and C2 screws.6. Car window are installed from the inside.7. Two headlights are installed from the inside of the car shell and fastened with a C2 screw for each.8. Two fog lamps are installed from outside to inside the car shell.Glue and fix from the inside.9. Install two heat dissipation holes， pay attention to the left and right directions.10. Install windshield wipers， left and right rearview mirrors， left and right door handles， and rear door wipers. Pay attention to the left and right directions.11. To install the rear lamp， two A3 screws and M2 nuts should be used to install the rear guardrail from the outside to the inside， and the nuts should be fastened inside.12. Install bracket with 8pcs B1 screws.Screw: A1: M2 x 6mm / 0.2in A2: M2 x 8mm / 0.3inA3: M2 x 10mm / 0.4inB1: M3 x 6mm / 0.2in B3: M3 x 10mm / 0.4in C1: M2 x 6mm / 0.2inC2: M2 x 8mm / 0.3inD1: M2.6 x 8mm / 0.3inM3: Nut M2: Nut1 x Set of RC Car Shell8 x Bag of Screw (Including 10pcs Nut)1 x Sticker1 x Manual1. Please allow 13mm error due to manual measurement. Thanks for your understanding.2. Monitors are not calibrated same， item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.3. The product will sent in bulk packing， and need to be assembled by yourself.- Brand: Waoniq
- Category: Motor Vehicle Body Paint
- Fruugo ID: 185520081-395952993
- EAN: 892798931754
- Sold by: Shenzhenshishuerwenkejiyouxiangongsi
Comment